Table housings as aluminium profile housings from the PrioLine® series

You define the dimensions - we manufacture your housing exactly to the mm according to your specifications with any surface and/or printing you desire.
For more information on the Prioline concept, please have a look at www.PrioLine.de - Table housing.

In the following, you will find some examples of already realised customised projects:
(customer-specific table housings, electronics housings as aluminium profile housings).

Table housing for fuel cell generator:
W440 x D470 x H270
- made of aluminium
- manufacturing, apertures, mounting parts...
acc. to customer specifications
- all contact surfaces chromated (electrically conductive)
- housing varnished in black and printed on 3 sides

More information ==>

Table housing for communication unit
W100 x D165 x H60
- completely made of aluminium
- manufacturing, apertures, mounting parts...
acc. to customer specifications (adaptation to existing circuit board with soldered-on connectors)
- all contact surfaces chromated (electrically conductive)

- housing varnished in light grey and printed in 2 colours

More pictures ==>

Table housing for video control GH41340.0002
External dimensions: L 256 x W 205 x H 71
completely made of aluminium

• bottom plate under side: with 8 thread nuts M3x6
• cover sheet upper side: without threaded bolts

More information ==>

19"-table housing GH43034.0002

• 4HU / 48DU / 230 deep
• or 19"-internal assembly:  4 cassettes 3HU/12DU
• incl. guiding rails
• fixing possibility for internal ventilators

More information ==>

Table housing GH4232.0001-a  with combined carry handle/support

• made of aluminium
• incl. mechanical processing
• chromated (electrically conductive)
• front side varnished RAL 7035 structure

More pictures and information ==>

Table housing for measuring technology
L305xW105xH180
adapted to customer-provided circuit board
varnished and printed

Table housing for control board
L160xW160xH50
with cover plate made of t r a n s p a r e n t plastic, so that you can read the displays on the printed circuit board.
Moreover, this provides an insight into the complete assembly of the device without touching it. Therefore it is ideally suited for demonstration models!

More pictures ==>

Table housing with combined carry handle/support.
different snap-in positions possible
widths up to 1000mm selectable by the customer

More pictures ==>

Table housing 2HU  W430 x H88 x D160
- completely made of aluminium
- manufacturing, apertures, mounting parts...
Acc. to customer specifications
- all contact surfaces chromated (electrically conductive)
- housing varnished in anthracite and front plate varnished in red
- front side recess for foil keyboard
Special feature:
- lid can be removed or drawn off towards the back
- option "plug-in housing version" available
- no visible screws on front side, as they are covered by the foil keyboard in using position
  - supplied incl. 4 rubber feet

Supplied complete with customised foil keyboard,
therefore no visible screws on the front side.

Control housing for control technique
L330xW230xH180
powder-coated
supplied incl. mounting angle for mounting on the machine

More pictures ==>

Housing for touchpanel, cplt. with support:
W300 x H300x D100
incl. customised apertures
front side recess for optional foil keyboard or front foil
inner surfaces chromated (electrically conductive)
special varnish acc. to customer specifications
housing also suitable for wall mounting (rear side threaded bolts).

Supplied complete with support.

More pictures ==>

Housing for DC/DC-power supply unit:
W353 x D200 x H108
- incl. apertures
- incl. mounting parts
- soldering lugs
- surface

More pictures ==>

Example: housing for X-ray fluorescence measuring device
- completely made of aluminium
- manufacturing, apertures, mounting parts...
Requirements specification:
- all contact surfaces chromated (electrically conductive)
- front side with MF2-foil keyboard and mouse substitution system
- possibility of integrating an industrial PC, a TFT-monitor
- lockable access to connexions, CD-Rom... via
  front cover
- measuring unit and PC unit are separate
- PC unit also available as 19”-plug-in module (6HU) without alterations
Special feature:
- integration of an ISAG workstation plug-in into a
  customised PrioLine ® table housing.

More pictures ==>

Table housing W270 x H90 x D190
- completely made of aluminium
- manufacturing, apertures, mounting parts acc. to
  customer specifications
- all contact surfaces chromated (electrically conductive)
- housing varnished in light grey
- front and rear side printed
Special feature: More pictures ==>
- base plate removable
- supplied incl. inside holder for power supply unit (bent component)

Table housing
H280 X W180 x D200
- completely made of aluminium
- manufacturing, apertures.... acc. to customer specifications
- housing all side anodised in natural colour

Housing for touchpanel GH40643.0001
Type: Table housing
Manufactured in PRIOline-technique
External dimensions HOUSING: W210xH320xD80mm

incl. mechanical processing
incl. threaded bolts
rough machined, without surface

Home Plastic enclosures Aluminium enclosures Metal enclosures sloped enclosures Desktop enclosures Plug-in housings Hand-held housings DIN-rail housings Multi-purpose housings Wall housings Standard housings Standard keyboards Housing accessories FAQ Company profile Processing Varnishing Express service News Wöhr GmbH

© 2002-2006 Richard Wöhr GmbH Gräfenau 58-60 D-75339 Höfen/Enz  Impressum

Tel: 07081/9540-0

Fax: 07081/9540-90

Email: Prioline@WoehrGmbH.de

Design und Webhosting durch RPF Netdesign letztes Update: 08/04/06