Home Plastic enclosures Aluminium enclosures Metal enclosures sloped enclosures Desktop enclosures Plug-in housings Hand-held housings DIN-rail housings Multi-purpose housings Wall housings Standard housings Standard keyboards Housing accessories FAQ Company profile Processing Varnishing Express service News Wöhr GmbH

METAL

Customised housing for medical device

Problem:
Separate display- and operating units for a medical device had to be designed as customised versions.
Both had to be mounted onto a trolley provided by the customer.

Solution:
Construction and preparation of drawings on the basis of customer-provided circuit boards and mounting-parts
Operating and machine housing as bent and welded aluminium construction
Contact surfaces chromated (electrically conductive) / visible surfaces chemically resistant and varnished in silver.

More pictures ==>

Housing for heat regulation unit

• made of aluminium 3mm, executed as weldment/bent component
• apertures acc. to customer specifications
• without visible screws in using position
• surface: 2-colour varnish acc. to RAL
• 3-colour printing (front-, back- and support plates and on the perforated plate)
• incl. INSERT PLATE, replaceable
    from aluminium
    with 4 back side threaded bolts

More information and pictures ==>

Customised housing for dental device

Problem:
A display and operating unit for a dental device had to be designed as customised version.

Extracts from the requirement specification:

• console-shaped
• construction on the basis of circuit boards and mounting-parts provided by the customer
• easy to clean, no rough edges
• mounting possibility for an easily accessible EMERGENCY-OFF-switch
• easy integration of the components and circuit boards
• NO visible screws from the outside
• lockable
• good EMC properties
• chemically resistant surface
• integrated operating-/display unit
• available on short notice

Solution:
operating and machine housing as bent and welded aluminium construction
contact surfaces chromated (electrically conductive) / visible surfaces chemically resistant and varnished in silver (multi-layer technique).
input via a customised foil keyboard flush with the front, where the display window is also integrated in a waterproof manner.
Manufactured and delivered in express service.
More pictures ==>

Customised housing for monitoring device

More pictures ==>

Problem:
A display and operating unit for a monitoring device had to be designed as customised version.

Extracts from the requirement specification:

• housing with customised dimensions and fixing devices
• easy assembly, flat and space-saving integration of the components and circuit boards required for display and operation
• good EMC properties
• customer-specific surface
• display back lighting not by means of EL-foil, but as LED-unit

Solution:

• aluminium housing as 2-parts bent aluminium construction
• contact surfaces chromated (electrically conductive) / visible surfaces varnished in yellow
• fixing parts and apertures acc. to customer specifications
• input via a customised foil keyboard in the cover
• the windows as well as the display itself are integrated in a dust- and waterproof manner, the same applies to the LCD controller. Extremely compact and space-saving assembly in FOILtronic®-technique.
• back lighting unit for LCD on the basis of LED-light guides
• display and back lighting system are protected against being pushed through/mechanical influences
• contacting of LED, LCD and keys via integrated foil cable with crimped sockets

Customised housing for laptop-accessory device

Housing for laptop-accessory devicet
W300 x D290 x H75

• incl. apertures
• incl. fixing parts
• incl. surface
• incl. foil keyboard

More pictures ==>

Customised housing for medical device

More pictures ==>

Problem:
A customer-specific table housing for a medical device was required.

Extracts from the requirement specification:

• rugged, heavy duty construction
• customised execution
• good EMC properties
• chemically resistant surface
• integrated maintenance flap in the bottom part
• rear fixing device for optional TFT-display-housing

Housing for medical devices cplt. with operating unit   D300 x W266 x H92

HOUSING:

• executed as aluminium bent construction

SPECIAL FEATURE:

• no visible screws in using position
• incl. side flap .....

More information and pictures ==>

Home   Plastic enclosures   Aluminium enclosures   Metal enclosures   sloped enclosures   Desktop enclosures   Plug-in housings   Hand-held housings   DIN-rail housings   Multi-purpose housings   Wall housings     Standard housings   Standard keyboards   Housing accessories     FAQ   Company profile   Processing   Varnishing   Express service   News   Wöhr GmbH

© 2002-2006 Richard Wöhr GmbH     Gräfenau 58-60     D-75339 Höfen/Enz

Tel: 07081/9540-0

Fax: 07081/9540-90

Email: kundenspezifische-Gehaeuse@Woehrgmbh.de

Design und Webhosting durch RPF Netdesign letztes Update: 08/04/06